PP塑料离心风机 PP4-72-A式

• PP4-72A型聚丙烯离心通风机

   PP4-72A型聚丙烯离心通风机参照金属4-72性能参数采用聚丙烯板，加热压模焊接而成。其广泛应用于科研、化工、冶金、电子、医药、纺织、仪表、电镀、矿山、学校酒店、宾馆、实验室、环保配套设备等行业中作通风换气排除酸碱性等有害气体通风之用。但不允许输送含芳香族化合物、脂肪族与芳香族碳氢化合物的卤素衍生物、酮类等腐蚀性气体。具有耐化学腐蚀、不易老化、比重小、机械振动小、噪音低、运转平稳等特点。其所输送气体不允许含有粘性物质、所含粉尘及硬质颗粒≤150mg/m3、气体温度50℃、相对湿度≤100%。且避免阳光暴晒、风机现场附近不得有热源。

• PP4-72A polypropylene centrifugal fan series

   The PP4-72 polypropylene centrifugal fan is made of polypropylene plate and heating die according to the metal 4-72 performance parameters. It is widely used in research, chemical, metallurgy, electronics, medicine, textile, instrumentation, electroplating, mining, school hotels, hotels, laboratories, environmental protection equipment and other industries for ventilation and ventilation to eliminate harmful gases such as acid and alkali. . However, it is not allowed to transport a corrosive gas such as a halogen derivative containing an aromatic compound, an aliphatic or an aromatic hydrocarbon, or a ketone. It has the characteristics of chemical corrosion resistance, aging resistance, small specific gravity, low mechanical vibration, low noise and stable operation. The gas to be transported is not allowed to contain viscous substances, dust and hard particles ≤150mg/m3, gas temperature 50°C, relative humidity ≤100%. And avoid sun exposure, there must be no heat source near the fan site.

外形及安装尺寸示意图 Lnstallation size diagram

宝贝为人工实物测量会有一定误差，以收到的宝贝为准。单位Unit: mm(毫米）

机 号
	进风口 Air inlet			出风口 Vent				外形尺寸 Shape size						底架尺寸 Bottom frame size
NO	Φ1	Φ2	Φ3	A1	A2	B1	B2	H1	H2	L5	L6	L7	L8	L1	L2	L3	L4	L9	N
2.8A	178	223	273	187	264	215	281	293	633	510	214	290	504	325	367	207	219	405	M12
3.2A	197	247	297	212	301	240	330	313	707	512	236	304	540	335	367	225	219	414	M12
3.6A	216	271	321	240	338	273	372	348	781	545	272	342	631	389	427	246	227	464	M12
4A	245	295	345	267	375	304	413	383	855	610	308	380	686	443	487	260	235	464	M12
4.5A	274	319	369	294	402	345	457	428	982	643	343	417	760	483	525	260	242	514	M12
5A	330	375	421	321	429	385	500	467	1065	620	374	466	987	498	548	260	360	588	M12
6A	395	458	480	408	520	463	574	548	1267	705	443	482	1025	535	585	280	425	673	M12
7A	443	498	553	406	519	478	584	629	1469	790	512	498	1063	587	645	320	490	758	M12
8A	499	599	619	467	582	553	653	710	1671	875	581	514	1100	639	705	320	555	843	M12