您好,欢迎进入广东肇科通风设备有限公司官网!

咨询服务热线

0758-2587681s

FRP玻璃钢立式 - 废气处理塔 - 酸雾净化塔

  • 产品简介: 本设备分单塔体和双塔体。采用圆形塔体,用法兰分段联接而成。具体由贮液箱、塔体、进风段、喷淋层、填料层、旋流除雾层、出风锥帽、观检孔等组成。 产品优势:该产品具有结构简单、能耗低、净化效率高和适用范围广的特点,能高效去除有毒废气污染气体。塔体可根据实际情况采用/FRP/SUS/PP及PVC等材料生产制作。 适用场合:本设备可广泛应用于化工、电子、冶金、电镀、纺织(化纤)、食品、机械制造等行业过程中排放的酸、碱性废气的净化处理。...
立即咨询
全国热线0758-2587681

详情介绍

  • BJT酸雾净化塔

     设备原理:对于腐蚀性气体(如酸、碱性废气)的治理,目前多采用液体吸收法治理。采用液体吸收法治理该废气,关键在于净化设备的选择。目前,我公司自主开发了净化效率高、操作管理简单、使用寿命长的酸、碱性废气净化工艺与设备。该工艺与产品具有结构简单、能耗低、净化效率高和适用范围广的特点,能有效去除氯化氢气体(HCl)、氟化氢气体(HF)、氨气(NH3)、硫酸雾(H₂SO。)、铬酸雾(CrO,)、氰氢酸气体(HCN)、碱蒸气(NaOH)、硫化氢气体(H2S)、福尔马林(HCHO)等水溶性气体。酸雾废气由风管引入净化塔,经过填料层,废气与氢氧化钠吸收液进行气液两相充分接触吸收中和反应,酸雾废气经过净化后,再经除雾板脱水除雾后由风机排入大气。吸收液在塔底经水泵增压后在塔顶喷淋而下,最后回流至塔底循环使用。净化后的酸雾废气达到广东省地方排放标准的排放要求,低于国家排放标准。
    设备特点: 本设备采用填料塔对废气进行净化,适合于连续和间歇排放废气的治理;工艺简单,管理、操作及维修相当方便简洁,不会对车间的生产造成任何影响;适用范围广,可同时净化多种污染物;压降较低,操作弹性大,且具有很好的除雾性能;塔体可根据实际情况采用FRP/PP/PVC/SUS等材料制作;填料采用高效、低阻的鲍尔环,可彻底地去除气体中的异味、有害物质等。
    结构形式: 本设备分单塔体和双塔体。采用圆形塔体,用法兰分段联接而成。具体由贮液箱、塔体、进风段、喷淋层、填料层、旋流除雾层、出风锥帽、观检孔等组成。
    产品用途: 本设备可广泛应用于化工、电子、冶金、电镀、纺织(化纤)、食品、机械制造等行业过程中排放的酸、碱性废气的净化处理。如调味食品、制酸、酸洗、电镀、电解、蓄电池等。
  • BJT acid mist purification tower

     Equipment principle: For the treatment of corrosive gases (such as acid and alkaline waste gas), liquid absorption method is currently used for treatment. The use of liquid absorption to treat this exhaust gas is the choice of purification equipment. At present, our company has independently developed acid and alkaline waste gas purification processes and equipment with high purification efficiency, simple operation and management and long service life. The process and the product have the characteristics of simple structure, low energy consumption, high purification efficiency and wide application range, and can effectively remove hydrogen chloride gas (HCl), hydrogen fluoride gas (HF), ammonia gas (NH3), sulfuric acid mist (H2SO), Water-soluble gas such as chromic acid mist (CrO), hydrogen cyanide gas (HCN), alkali vapor (NaOH), hydrogen sulfide gas (H2S), formalin (HCHO). The acid mist exhaust gas is introduced into the purification tower by the air duct, and passes through the packing layer. The exhaust gas and the sodium hydroxide absorption liquid are fully contacted by the gas-liquid two-phase to absorb the neutralization reaction, and the acid mist exhaust gas is purified, and then dehydrated and defogged by the defogging plate. The fan is discharged into the atmosphere. After the bottom of the tower is pressurized by the water pump, the absorption liquid is sprayed on the top of the tower, and finally returned to the bottom of the tower for recycling. The purified acid mist exhaust gas meets the emission requirements of local emission standards in Guangdong Province and is lower than the national emission standard. Features of the equipment: This equipment uses packed tower to purify the exhaust gas, suitable for the treatment of continuous and intermittent exhaust gas; the process is simple, the management, operation and maintenance are quite convenient and concise, and will not have any impact on the production of the workshop; At the same time purify a variety of pollutants; low pressure drop, high flexibility, and good defogging performance; tower body can be made of FRP/PP/PVC/SUS and other materials according to the actual situation; filler with high efficiency, low resistance of Bauer The ring can completely remove odors, harmful substances and the like in the gas.
型 号








设计风量
(M3/h)
配用风机
型号(No)
配用风机
功率(Kw)
配用风机
风量(M3/h)
配用风机
全压(Pa)
配用耐酸水泵
型号(No)
配用耐酸水泵
功率(KW)
配用耐酸水泵
风量(M3/h)
BJT-6501500F4-72-3.6A1.11332-2634
Y2-801-20.759
BJT-8003000F4-72-4.5A1.12712-5084
Y90S-21.512
BJT-10005000F4-72-5A2.24096-6952
Y90S-21.512
BJT-12008000F4-72-6A46291-14124
Y2-90L-22.224
BJT-140010000F4-72-6C5.58288-16575
Y2-90L-22.224
BJT-150013000F4-72-6C1112000-15890
Y2-90L-22.224
BJT-165015000F4-72-8C7.512224-167051209-1166Y2-112M-2433
BJT-200020000F4-72-10C1122312-31230
Y2-112M-2433
BJT-240024000F4-72-10C1525100-34000
Y2-112M-2433
BJT-300030000F4-72-12C18.528170-37000850-720Y2-112M-25.539
BJT-350035000F4-72-12C3034218-478001090-850Y2-132S2-27.537


酸雾初试浓度HCL<1000mg/m3净化效率95~99%
H2SO4<1000mg/m392~98%
NH3<100mg/m395%
HCN<100mg/m390~95%
CrO3<500mg/m392~98%


注:以上性能仅供参考,不作客户实际操作使用。客户如需增加净化效率可增高塔体、增加喷淋、净化层,详细请与我司联络。
中和液NaOH溶液尝试2-6%
净化塔阴力(Pa)400



酸雾净化塔安装尺寸示意图



单位Unit: mm(毫米)

型号
外观尺寸











BJT650BJT800BJT1000BJT1200BJT1400BJT1500BJT1650BJT2000BJT2400BJT3000BJT3500
ø650800100012001400150016502000240030003500
ø130035040040050050060080080010001200
ø230035040040050050060080080010001200
ø3750900110013001500160017502100250031003600
H30003100360039003900390042004800540060006000
H1500500600600600600600600800800800
H27508009009001000100012001300150015001800
L10001200160018002000200022002800320038004300


推荐产品

  • 联系方式
  • 联系人:何俊桦
  • 手机:13129772337(微信同号)
  • 电话:0758-2587681
  • 传真:0758-2587682
  • 邮箱:zktfsb@126.com
  • 网址: http://www.zktfsb.com.cn
  • 地址:肇庆市端州区端州二路财富广场A座13楼1305室
友情链接
淘宝
百度一下
微博
在线咨询

咨询电话:

0758-2587681

  • 微信扫码 关注我们

Copyright © 2002-2022 广东肇科通风设备有限公司 版权所有 Powered by EyouCms 备案号:粤ICP备2022105214号">粤ICP备2022105214号
扫一扫咨询微信客服
0758-2587681

遇到问题?请给我们留言

请填写您的邮箱地址,我们将回复您的电子邮件

本站访客:14955