PP塑料离心风机 PP4-72-C式

• PP4-72C型聚丙烯离心通风机

   PP4-72C型聚丙烯离心通风机参照金属4-72性能参数采用聚丙烯板，加热压模焊接而成。其广泛应用于科研、化工、冶金、电子、医药、纺织、仪表、电镀、矿山、学校酒店、宾馆、实验室、环保配套设备等行业中作通风换气排除酸碱性等有害气体通风之用。但不允许输送含芳香族化合物、脂肪族与芳香族碳氢化合物的卤素衍生物、酮类等腐蚀性气体。具有耐化学腐蚀、不易老化、比重小、机械振动小、噪音低、运转平稳等特点。其所输送气体不允许含有粘性物质、所含粉尘及硬质颗粒≤150mg/m3、气体温度50℃、相对湿度≤100%。且避免阳光暴晒、风机现场附近不得有热源。

• PP4-72C polypropylene centrifugal fan series

   The PP4-72 polypropylene centrifugal fan is made of polypropylene plate and heating die according to the metal 4-72 performance parameters. It is widely used in research, chemical, metallurgy, electronics, medicine, textile, instrumentation, electroplating, mining, school hotels, hotels, laboratories, environmental protection equipment and other industries for ventilation and ventilation to eliminate harmful gases such as acid and alkali. . However, it is not allowed to transport a corrosive gas such as a halogen derivative containing an aromatic compound, an aliphatic or an aromatic hydrocarbon, or a ketone. It has the characteristics of chemical corrosion resistance, aging resistance, small specific gravity, low mechanical vibration, low noise and stable operation. The gas to be transported is not allowed to contain viscous substances, dust and hard particles ≤150mg/m3, gas temperature 50°C, relative humidity ≤100%. And avoid sun exposure, there must be no heat source near the fan site.

外形及安装尺寸示意图 Lnstallation size diagram

产品为人工实物测量会有一定误差，相关数据仅作参考，以收到的实物为准。单位Unit: mm(毫米）

机 号
	进风口 Air inlet		出风口 Vent				外形尺寸 Shape size			底架尺寸 Bottom frame size
NO	Φ1	Φ2	A1	A2	B1	B2	H1	H2	L5	L1	L2	L3	L4	N
6C	375	480	410	520	464	574	645	1115	1640	920	1200	395	830	M12
7C	460	530	490	600	560	670	730	1240	1890	1075	1405	395	880	M12
8C	795	910	585	730	620	800	900	1500	2410	1130	1610	520	1130	M12
10C	960	1140	700	845	810	950	1080	1850	2520	1360	2010	540	1320	M12